How to solve the problem of moldy and long hair on the wall after decoration
date：
2013-03-05
source：
Cause Analysis:
Moisture on the wall is the main cause of mold, yellowing, and long hair on the wall. There are generally three reasons for the wall to get wet:
First, the water supply pipe or heating pipe leaks, causing the wall to be damp.
The second is that the roof or outer wall is not waterproof or the waterproof quality is poor, and rainwater seeps into the wall or indoors.
The third is that the windows, kitchen and bathroom are not well waterproofed, which leads to the penetration of water.
solution:
First of all, the most direct way is to open more windows for ventilation and reduce the indoor humidity, that is, the water vapor content. After the wall is slightly dry, use bleach or 84 disinfectant to smear the wall for mildew, and wash with 5-10% dilute oxalic acid solution for pan-alkali salting out. The two treatment solutions are easy to irritate the skin and discolor the clothes, so you must wear rubber gloves, masks, and clothing during operation.
If there is mildew, severe pan-alkali salting out, or there is a continuous source of moisture on the wall, it is necessary to carry out the second construction of the wall to completely cure the problem of mildew and hair on the wall. The second construction of the wall is mainly divided into three steps.
1. Remove the surface layer of the moldy and hairy wall: Thoroughly remove the loose layer of the moldy and hairy part of the wall and wait for the wall to dry.
2. Rolling interface agent: After removing the moldy and hairy loose layer of the wall, roll the blue star corundum interface agent on the wall for 2-3 times until the surface is dense and no powder is lost. If there is a continuous source of moisture, brush the Blue Star Corundum waterproof elastic interface agent.
3. Apply waterproof coating: After the rigid waterproof coating is applied, cracks will occur along with the wall, which will cause the loss of waterproof function. It is necessary to use flexible or elastic waterproof coating, preferably elastic waterproof coating. Bluestar steel jade elastic waterproof coating can penetrate into the pores and gaps of concrete to form a tough elastic waterproof membrane, which can effectively prevent the penetration of water and achieve waterproof effect under the condition of ensuring air permeability. effect. After rolling the interface agent, apply a full batch of elastic waterproof coating on the wall, requiring at least 2-3 layers of scraping (the irregular parts that cannot be scraped can be painted), and the thickness of each layer is about 1mm. After finishing one layer, it must be Wait for it to cure completely before doing a second coat. The final thickness after finishing construction should not be less than 2mm.
4. Putty construction: After the waterproof coating is dry, apply putty or complete other follow-up projects in strict accordance with the relevant product instruction manuals.
Prev： Why do you need to brush the interface agent before scraping the putty?
Next： Market Prospects of Multifunctional Waterproof Coatings
Related news
Waterproofing works should not be ignored
Home improvement waterproofing is an important hidden project. Once it leaks, the furniture and walls will become moldy, and the decoration will be damaged, and the neighbors will lose peace, and the loss will easily cost tens of thousands. To avoid the problem of moisture and leakage, it is necessary to understand the misunderstanding of waterproofing and supervise the quality of the product, so as to ensure that there is no "wet".
Why do you need to brush the interface agent before scraping the putty?
Loose walls, loose base layers that are not completely removed, floating ash on the surface, and alkali salting out are all reasons for the hollowing and falling of the wall. General interface agents on the market can solve the problem of not removing the floating ash. The fully functional Bluestar corundum interface agent can solve all the above problems.
How to solve the problem of moldy and long hair on the wall after decoration
First, the water supply pipe or heating pipe leaks, causing the wall to be damp. The second is that the roof or outer wall is not waterproof or the waterproof quality is poor, and rainwater seeps into the wall or indoors. The third is that the windows, kitchen and bathroom are not well waterproofed, resulting in water penetration.
Market Prospects of Multifunctional Waterproof Coatings
With the development of science and technology, in the future bridge construction, film-covered and crystalline-permeable inorganic waterproof coatings will be more and more applied. Waterproof technology has been applied in engineering.
Mildew is caused by bacteria and mildew, which manifests as black, brown and other irregular markings on the wall; long hair is caused by soluble salt and alkali in the wall after dissolving and migrating to the wall to recrystallize, which is called pan-alkali or salt. Analysis, manifested as yellowing, white powder or hair on the wall.
The choice of home improvement waterproof coating is exquisite
In modern home decoration, waterproofing is an important part. In general, bathrooms, kitchens, and bathrooms should have waterproof layers. However, many families have no clear concept of how to choose a qualified waterproof coating.
微信咨询
微信公众号
Factory Address: No. 166 Dayang Road, Shuangliu Park, Jiaolong Industrial Port, Chengdu
Tel: +86-028-85739619 +86-400-660-0005